GETÔ
Wash Water Recyclers offer the ultimate in efficiency, reliability, and quality.
Used wash water is recycled using a compact, self-contained, multi-stage, state
of the art water treatment system. The wash water is collected into a sump or
holding tank. Then all you need is the GETÔ
WWR closed loop system to provide a continuous supply of clean water for washing
again. And again. And again.
The
GET WWR system operates as follows:
(1)
Sump/Feed Pump
The system is provided with a low shear pump to
prevent the formation of a mechanical emulsion which could hinder oil
separation. You may choose a sump type pump to be used with a below grade
collection pit or a feed pump mounted on the Waste Water Recycler.
Either pump is constructed of high quality corrosion resistant materials.
(2)
Flocculant Injection
A flocculant injection system is used to aid in the
removal of suspended solids that can cause excessive filter replacement costs.
This disinfectant is non-toxic, and acts to collect smaller particles together
into clumps for easy removal by subsequent system components.
(3)
Oil & Solids Separator
The water next enters the Oil & Solids Separator
where oils and greases are mechanically separated from the water for skimming,
and solids are allowed to collect at the tank bottom and flow to the solids
collection tank. The valve on the bottom leading to the solids collection tank
may be opened from time to time or left partially open for a controlled flow. An
automatic oil skimmer separates and removes oil, along with some water, to an
oil collection tank.
(4) Oil Collection Tank
The oil collection tank contains additional
mechanical separation media for second stage treatment. Oils are drained off the
top from time to time using a manual valve. Water is returned to the sump from
time to time using a second manual valve.
(5)
Filter Pump
After oil and solids separation, The Filter Pump
pulls the treated water from a mid-level position in the oil & solids
collector tank and pumps the water through the filters for further purification.
The Filter Pump is also constructed of corrosion resistant materials for long,
trouble-free life.
(6)
Multi-Media Filter
The Multi-Media filter removes fine dirt and
turbidity. An automatic backwash
cleaning system reduces maintenance and keeps operating expenses low. The long
life media lasts for years with proper operation. The automatic valve is set
using a timer.
(7) Activated
Carbon Filter
The Activated Carbon Filter removes any remaining
oil, any pesticides, and helps with odor control. It is supplied with a backwash
valve to extend the life of the carbon media. The automatic valve is set using a
timer.
(8)
Disinfectant Injection
A disinfectant injection system is used to prevent
bacterial growth that can cause excessive filter replacement and unpleasant
odors. This disinfectant is non-toxic, and aids in color removal and overall
water quality. Hydrogen Peroxide is recommended, but chlorine may also be used.
(9) Cartridge
Filter
The 5m
Cartridge Filter removes any remaining fine solids and trace amounts of oil.
This assures that the recycled water is clean enough to be used for washing
again.
(10) Storage
Tank
(Optional)
The GETÔ
WWR Wash Water Recycler can be supplied with the customer’s choice of storage
tanks. The optional tank is furnished with an automatic fresh water make-up
system so that the cleaning equipment is assured of a continuing supply of
water. A repressurization pump (also optional) can boost the water pressure to
the desired level for feeding the wash system.
(11) Solids
Collection Unit
Solids removed from the Oil & Solids Separator
are collected in this part of the system for easy, economical disposal. The
backwash flow from the Multi-Media and ACF filters also run through this system
before returning to the sump. This collections unit allows water to drain back
to the sump for reuse, while retaining the solids for disposal through a manual
valve located at the bottom of this cone-bottom tank. An opening sized for
typical 5-gallon buckets has been made under this tank.
The GETÔ WWR system is your assurance of substantial savings in
water costs, compliance with environmental regulations, and improvement of the
environment. Its economical operation, founded on quality materials,
state-of-the-art design and superb craftsmanship, guarantees you years of
trouble-free, cost-effective performance. GETÔ warrants the systems to be free of defects in materials
and workmanship for one full year from the date of installation (up to 18 months
from date of shipment from the factory). | 