Scale Zappers
For Commercial & Industrial Use
Eliminate Scale Buildup From Piping, Equipment, Fixtures &
Appliances
Cost Effective
Very Low Maintenance
Environmentally Friendly
Highly Effective
Very Low Operating Costs
Hard
water can be the cause of scale buildup in piping, resulting in inadequate flow
& pressure, problems adjusting water temperatures, and costly premature
replacement of pipes & equipment. Scale buildup from hard water also causes
water heaters, boilers, and other equipment to fail prematurely. Manufactured
goods and items that require cleaning can also have problems from scale
accumulation. Hard water also reduces the effectiveness of soaps &
detergents.
Historically, these problems
have been dealt with by means of water softeners. Water softeners use an ion
exchange resin and are regenerated with salt. This means that your water supply
has a greatly increased sodium content, which is not beneficial to your health
when used as drinking water. Additionally, each time that a softener is
regenerated, a significant amount of brine, or highly salty water, is dumped to
the drain. Because this is such a significant source of pollution, such water
softeners are banned or restricted in some areas.
Now, due to important
technological breakthroughs, GET is pleased to provide a sure cure for scale
problems that does not pollute, does not add sodium to your water, and does not
require any maintenance. This new device, the environmentally friendly GET Scale
Zapper, eliminates scale buildup using a unique patented technology. Very little
space is required. No electrical power is required. In-line installation is
extremely easy and can be done quickly by a handyman or plumber. The GET Scale
Zapper is suitable for use with copper, steel, PVC, ABS or any other common type
of pipe. The GET Scale Zapper does not change the chemical makeup of your water.
Nothing is added, and no minerals are removed.
The
secret to this new, patented technology, now proven in thousands of
installations in over 26 countries, is a unique design that uses precious metals
in a special shape in a compact, in-line device. Utilizing its composition and a
calculated water turbulence that the unique design causes, the GET Scale Zapper
operates as a catalyst using the pH rise generated by the alloy to trigger
precipitation of calcium carbonate in the water, forming stable crystals. This
results in water
which has less calcium carbonate in solution and a suspended mass of
crystals. Due to the reduction of dissolved calcium carbonate, scaling problems
are eliminated. The crystallized calcium carbonate remains in suspension and
does not interfere with normal usage of the water. Soaps are more effective
again. Scaling is also usually reversed, causing scale buildups to loosen and
fall off. Deposits in basins and tubs are reduced and easier to clean. Now you
can have the advantages of a water softener without the disadvantages. Sizes
from ¼” to 12” pipe. Contact GET, Inc. for expert, friendly assistance in
solving your water problems.
|
