|
GET, Inc.
|
|
750 W Wind Turbine Specifications
750
kW
Horizontal Axis Wind Turbine - Specifications
Performance Rated Power: 750kW Cut-in Speed: 3 m/s Rated Speed: 12 m/s Top Speed: 25 m/s Primary Brake: Blade pitch
(aerodynamic, battery back-up) Secondary Brake: Mechanical
brake (4 Discs, Active hydraulic) Tip brake control:
Hydraulic control Direct drive concept
without gearbox
Measurements Rotor Diameter: 50 meters Number of Blades: 3 Hub Height: 50 meters (54
and 57 meters hub heights also available)
Generator Generator: Permanent
Magnet, Synchronous Cooling: Liquid cooling Rated Power: 807 kW Rated Voltage: 780V Grading Protection: IP54 Insulation Levels: F
Power Converter Type: AC/DC/AC Inverter Voltage: 690 Frequency: 60Hz
Grid Compatibility Frequency: 60 Hz +/- 1 Hz
during 0.1 sec Over voltage: 690 VACx110%
during 0.1 sec Under voltage: 690 VACx90%
during 0.1 sec Phase unbalance: 120+/- 6
degrees
Noise Performance SPL@8m/s: 100dB(A)
Control System Processor: Programmable
Logic Controller, PMU interface Communication: Profibus –
DP, CAN BUS Pitch Control: RMP
Regulation SCADA: Web based (ISDN
possible) Grid monitoring: Digital
Power Meter
Yaw System Type: Active control of
wind Drive: 3 x Asynchronous
motor Yaw Braking: Active
hydraulic disc brakes Yaw Bearing: Ball bearing
Condition-based Monitoring Power converter cooling Generator cooling Bearing temperatures Vibration monitoring Hydraulic system pressures Rotor brake wear detect
Environmental Temperature range: -15 to
40°C in operation, -20 to 55°C stand still Lightning protection: Blade
receptors, internal ground conductor, Nacelle lightning brush, IEC61400-24
|
|
Copyright 1995-2008 GET, Inc. Water Problems? GET the Complete Solution! Quality is remembered long after the price has been forgotten. Hablamos Español.
GET, Inc. Global EnviroScience Technologies, Inc.
Mail:
PO Box 90756, Long Beach, CA 90809-0756, USA Tel: 1-562-983-7777; Fax: 1-562-608-8875
E-Mail
us now! :
info@get-inc.com
|